HSS4-001-U
FerroForcia 4-side doors hinge set (unassembled / paint yourself) for Land Rover Defender 110 / 130
The side door hinge set is universally designed to fit all rear doors of Land Rover Defenders up to and including 2016 production. This set is uncolored and unassembled. The paint must be applied by yourself (the hinges do contain a special pre-paint coat for easy painting/spray). In addition, these hinge parts still need to be assembled, please follow the instruction sheet (downloadable below) for that.
- Paint yourself
- High-quality aluminium for durability
- Neat design
- Easy to mount
- Smooth door movement
- Including grease nipple for easy maintenance
For painting / spray a few area’s NEED be taped over, see downloadable instruction sheet.
Painting / spray is a MUST! Otherwise there’s not enough protection against wheather influences.
Specifications
| Material | Aluminium hinge (with special pre-paint coat) |
| Application | Land Rover Defender 110 / 130 |
| Color | uncolored |
| Recognizability | – |
| Optional | – |
| Content | 1x left mirror hinge |
The aluminium hinge parts contain a special pre-paint coating. It’s very important that the hinges are treated with a good paint, otherwise there’s no adequate protection against weather influences. Spray / painting therefore is a MUST with this hinge set.
In order to let the hinge do its work, it’s decided to use galvanized brass rings in between the two aluminium parts. The pivot point therefore continues to move easily. Brass rings are chosen as these do not break through cold or heat. The rings are galvanized to keep them looking nice, so they do not turn green in time. In addition, the silver grey matches the black colour nicely.
The hinge is well thought out and a neat design has been chosen. Everything for the quality and the eye. The hinge is not rugged, but has soft gradients and lines for a sleek, subtle look.
Before mounting the hinges on the Defender, the hinge parts need to be painted, assembled and greased.
The hinge connects seamlessly with the sheet metal of the door. If the bodywork of your Defender is slightly curved, you can easily compensate for this by using filler plates. Both original and imitation bolts can be used for mounting. The hinges are greased upon delivery. Each hinge set consists of two hinges suitable for mirror mounting. These can be recognized by the 2 extra holes of Ø7.
At our YouTube channel you can also find mounting videos for each door (left door with mirror, left door without mirror, right door with mirror).
The hinges are NOT greased by us. With this unassembled hinge set you need to do this yourself after painting and asembly.
Our hinge sets are excluding bolts, nuts, revets and shims for mounting. What do you need?
- 8x M4x40
- 16x M8x55
- 4x M8x80
- 4x M8x90
- 16x M8 self-locking nut
- 16x M8 revet
- Possibly a few filler plates
Ensure that the clips from the front door bar do not fall behind the sheet metal when disassembling. The same applies to the weld plate with nut at the rear door bar. These clips and plate are required for mounting the FerroForcia hinge sets. These can often be re-used because they are not exposed to weather conditions.
The hinges contain a grease nipple and internal channels in the hinge pin to get the maintenance grease in the right places. This allows the entire inside of the hinge, every corner and hole, to be greased. This ensures a longer lifespan for the hinge.
A grease syringe can be easily clicked onto the nipple to grease the hinge. In this way you prevent ‘dirty’ stripes over your door after maintenance, since the grease is not applied from the outside of the hinge.
The grease nipple is perpendicular to the hinge, so you can always access it with the grease syringe, regardless of any extra accessories like rocksliders or silk protectors. The grease nipple has a conical wire, so it’s mounted solid to the aluminium part of the hinge.
These unassembled hinges are NOT greased by us. For a long hinge life, it’s important to thoroughly grease the parts yourself.
