FerroForcia complete 4-side doors hinge set (unassembled / paint yourself) including all mounting parts for Land Rover Defender 110 / 130
€ 818,18 excl. vat
This set contains the FerroForcia 4-side door hinge set (HSS4-001-U), bolt set (MSB-004), filler plate set (MSF-004), 8 clip-on nuts (MSN-001) and 4 nut plates (MSN-002).
This set is uncolored and unassembled. The paint must be applied by yourself (the hinges do contain a special pre-paint coat for easy painting/spray). In addition, these hinge parts still need to be assembled, please follow the instruction sheet (downloadable below) for that.
The side door hinge set is universally designed to fit all rear doors of Land Rover Defenders up to and including 2016 production.
Includes all mounting parts!
High-quality aluminium for durability
Easy to mount
Smooth door movement
Including grease nipple for easy maintenance
The filler plates ensure a nice connection of the sheet metal and offer protection of the door’s paint
For painting / spray a few area’s NEED be taped over, see downloadable instruction sheet.
Painting / spray is a MUST! Otherwise there’s not enough protection against wheather influences.
Aluminium hinge (with special pre-paint coat)
Brass rings (galvanized)
Tool steel pin (galvanized)
Steel grease nipple (galvanized)
Steel blind cap (galvanized)
PE-HD (filler plates)
The aluminium hinge parts contain a special pre-paint coating. It’s very important that the hinges are treated with a good paint, otherwise there’s no adequate protection against weather influences. Spray / painting therefore is a MUST with this hinge set.
In order to let the hinge do its work, it’s decided to use galvanized brass rings in between the two aluminium parts. The pivot point therefore continues to move easily. Brass rings are chosen as these do not break through cold or heat. The rings are galvanized to keep them looking nice, so they do not turn green in time. In addition, the silver grey matches the black colour nicely.
The hinge is well thought out and a neat design has been chosen. Everything for the quality and the eye. The hinge is not rugged, but has soft gradients and lines for a sleek, subtle look.
Before mounting the hinges on the Defender, the hinge parts need to be painted, assembled and greased.
The hinge connects seamlessly with the sheet metal of the door. If the bodywork of your Defender is slightly curved, you can easily compensate for this by using filler plates. Both original and imitation bolts (included in this set) can be used for mounting. The hinges are greased upon delivery. Each hinge set consists of two hinges suitable for mirror mounting. These can be recognized by the 2 extra holes of Ø7.
At our YouTube channel you can also find mounting videos for each door (left door with mirror, left door without mirror, right door with mirror).
The hinges are NOT greased by us. With this unassembled hinge set you need to do this yourself after painting and asembly.
This set contains everything you need, except the tools, to mount the FerroForcia 2-side door hinges on to your Defender! So you do not need any other parts.
The hinges contain a grease nipple and internal channels in the hinge pin to get the maintenance grease in the right places. This allows the entire inside of the hinge, every corner and hole, to be greased. This ensures a longer lifespan for the hinge.
A grease syringe can be easily clicked onto the nipple to grease the hinge. In this way you prevent ‘dirty’ stripes over your door after maintenance, since the grease is not applied from the outside of the hinge.
The grease nipple is perpendicular to the hinge, so you can always access it with the grease syringe, regardless of any extra accessories like rocksliders or silk protectors. The grease nipple has a conical wire, so it’s mounted solid to the aluminium part of the hinge.
These unassembled hinges are NOT greased by us. For a long hinge life, it’s important to thoroughly grease the parts yourself.
The aluminium hinge parts contain a special pre-paint coating. The color of the separate hinge-parts can therefore be grey, dark grey or black. The exact color of the hinge parts can even differ from one another a bit. The treatment of pre-paint coating is meant for a good paint result, not to deliver a completely ready hinge with perfect colors.
It’s very important that the hinges are treated with a good paint, otherwise there’s no adequate protection against weather influences. Spray / painting therefore is a MUST with this hinge set.
The hinge parts are precisely machined, with little room for extra paint thickness. It is important that the area where the hinge pen and ring make contact are sealed before painting. For more details see the assembly list.
Note: we are not responsible for any paint that comes loose of the hinge parts, as we can’t control the quality of your own paint(er).